To mirror wheels
Step 1
If you would like to mirror the wheels, the first thing you need to do is to deselect the points selection, activated the mirror tool ( V ) and bring out the numeric panel ( n ). Later, you have to close the panel and press Enter.
Step 2
The result will appear as shown below.
To reuse existing object for the other part
Step 1
If you would like to ruse the existing object for the other part, the first thing you need to do is to cut parts2 and paste into fifth layer.
Step 2
Then, cut ( x ) the object again and paste ( v ) it into the forth layer.
Step 3
Next, you need to mirror ( V ) another wheel for the back part.
Step 4
After that, just select the wheel.
Step 5
After that, press the H key for size tool, and then bring out the numeric panel and set factor to 130%.
Step 6
Now, you can see that the selected wheel is bigger than the other one. But the width is not big enough.
Step 7
Next, stretch ( h ) the wheel bigger in top view.
Step 8
Select the points and move ( t ) it lower.
Step 9
Now select all the points and move ( t ) it to the left along the X axis.
To safe surface for the objects
Step 1
To safe the surface for the objects, the first thing you need to do is to click on the first layer. And then press q key to bring out change surface panel. Named the object as body.
Step 2
Go to second layer and select the steering in polygons selection mode and you need to name the object as steering.
Step 3
Then select the sofa and name it as sofa.
Step 4
Go to the third layer and name the objects as parts1.
Step 5
Then, go to the fourth layer and name the object as wheel.
Step 6
Go the fifth layer and name the layer as wheelRing
Step 7
Next, you need to go to the sixth layer and name the object as parts2.
To create the Left & Right Front
Step 1
If you would like to create the Left Front/ Pushrod, first you need to create a cylinder using Disc tool.
Step 2
Next, you need to draw another cylinder using Disc tool.
Step 3
After that, you have to select the cylinder in polygons selection mode.
Step 4
After that, mirror ( V ) the selected polygons.
Step 5
Later, you need to select the points in Point selection.
Step 6
Next, you have to move ( t ) the points forward.
Step 7
Later you ought to draw another cylinder.
Step 8
Then, select the cylinder and mirror ( V ) another one.
Step 9
Select the points in point selection mode.
Step 10
After that, you have to move ( t ) the selected points downward.
